RADIATORS AND FAN SHROUDS

Mishimoto is a premier manufacturer of performance aluminium radiators, racing thermostats, aluminium fan shrouds, universal intercoolers, silicone hose kits and cooling accessories.

INDUCTION KITS, EXHAUSTS AND MORE

Whether it is engine, exhaust, suspension, or drive-train systems, there is no substitute for the performance, quality and reliability of HKS

SPECIALIST CARBON AND AERO PARTS FROM JAPAN

Drift Society is now the UK and EU supplier of Garage Mak products! Revolution produced by Garage Mak offer a wide range of Aero Parts for Universal applications and the Nissan range

HKS Hipermax IV GT Coilovers Skyline R32

£1,620.00
  • Brand: HKS
  • Availability: In Stock

Specifications: - Front Damping Force Adjustment: Yes- Rear Damping Force Adjustment: Yes- Damping Force Adjustment: Yes- Levels of Damping: 30 levels- Front Upper Mount Type: Rubber- Rear Upper Mount Type: Rubber- Shock Absorber Design: Monotube- Shock Absorber Type: Gas Charged- Without External Reservoir- Front Spring Rate: 392 lbs/in (7 kg/mm)- Rear Spring Rate: 392 lbs/in (7 kg/mm)- Front Spring Tall:...

Specifications:


- Front Damping Force Adjustment: Yes
- Rear Damping Force Adjustment: Yes
- Damping Force Adjustment: Yes
- Levels of Damping: 30 levels
- Front Upper Mount Type: Rubber
- Rear Upper Mount Type: Rubber
- Shock Absorber Design: Monotube
- Shock Absorber Type: Gas Charged
- Without External Reservoir
- Front Spring Rate: 392 lbs/in (7 kg/mm)
- Rear Spring Rate: 392 lbs/in (7 kg/mm)
- Front Spring Tall: 9.8" (250 mm)
- Rear Spring Tall: 8.0" (200 mm)


Features:


- Single Tube Damper Design
- Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and centre of gravity gives a more stable ride.
- Dust Boot
- Protect the shaft from the flying stones.
- PNE Coating
- Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.
- "M Shaft"
-  With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range because of the optimized oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.
- New Design Needle
- Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.
- Reduction of Unsprung Weight
- In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)
- 30 Step Damping Force Adjustment
- 30 levels of dampening adjustment allow fine tune adjustment for street or circuit.

}); }); } window.___gcfg = { lang: 'en_US' }; }); }
Works with AZEXO Shopify page builder